Effect of plate aspect ratio on the recovery of deuterium from water-isotope mixture in flat-plate thermal diffusion columns with transverse sampling streams

The optimal plate aspect ratios for the best recovery of deuterium from water-isotope mixture in flat-plate thermal diffusion columns with transverse sampling streams have been determined. The maximum recovery and maximum production rate are achieved without changing the total expenditure, while the design with minimum plate surface area results in minimizing the total expense.     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

聚苯乙烯颗粒对轻质混合土的影响

在室内试验的基础上,对轻质混合土密度、抗压强度、压缩变形特性等进行了分析,结果表明:EPS颗粒含量变化对降低轻质混合土的密度作用效果显著;EPS颗粒含量对混合土抗压强度的影响很小,抗压强度主要取决于水泥的含量;在压缩变形特性方面,荷载小于混合土压缩屈服应力时EPS颗粒含量对混合土的压缩变形量影响较小。由此认为EPS颗粒在降低混合土密度方面具有一定的优越性,但对混合土的抗压强度、压缩变形量影响不明显,所以将混有EPS颗粒的轻质混合土作为填土材料具有很好的应用前景。     

Using airborne laser scanning to monitor tree migration in the boreal-alpine transition zone

The boreal tree line is expected to advance upwards into the mountains and northwards into the tundra due to global warming. The major objective of this study was to find out if it is possible to use high-resolution airborne laser scanner data to detect very small trees — the pioneers that are pushing the tree line up into the mountains and out onto the tundra. The study was conducted in a sub-alpine/alpine environment in southeast Norway. A total of 342 small trees of Norway spruce, Scots pine, and downy birch with tree heights ranging from 0.11 to 5.20 m were precisely georeferenced and measured in field. Laser data were collected with a pulse density of 7.7 m^− 2. Three different terrain models were used to process the airborne laser point cloud in order to assess the effects of different pre-processing parameters on small tree detection. Greater than 91% of all trees > 1 m tall registered positive laser height values regardless of terrain model. For smaller trees (< 1 m), positive height values were found in 5-73% of the cases, depending on the terrain model considered. For this group of trees, the highest rate of trees with positive height values was found for spruce. The more smoothed the terrain model was, the larger the portion of the trees that had positive laser height values. The accuracy of tree height derived from the laser data indicated a systematic underestimation of true tree height by 0.40 to 1.01 m. The standard deviation for the differences between laser-derived and field-measured tree heights was 0.11-0.73 m. Commission errors, i.e., the detection of terrain objects — rocks, hummocks — as trees, increased significantly as terrain smoothing increased. Thus, if no classification of objects into classes like small trees and terrain objects is possible, many non-tree objects with a positive height value cannot be separated from those actually being trees. In a monitoring context, i.e., repeated measurements over time, we argue that most other objects like terrain structures, rocks, and hummocks will remain stable over time while the trees will change as they grow and new trees are established. Thus, this study indicates that, given a high laser pulse density and a certain density of newly established trees, it would be possible to detect a sufficient portion of newly established trees over a 10 years period to claim that tree migration is taking place.     

掺矿渣微粉和粉煤灰的水泥胶砂性能试验研究

 根据正交设计法,利用L24(61×41×23)正交表安排试验,探讨了混合材掺 量、矿渣微粉与粉煤灰的比例、矿渣微粉细度、粉煤灰品种对水泥胶砂流动度、7,28,90 d 龄期的抗压强度的影响,初步确定水泥熟料、矿渣微粉、粉煤灰三元体系的较优组合。结果 表明,粉煤灰与矿渣微粉双掺比单掺矿渣微粉或单掺粉煤灰的水泥胶砂,具有一定的优势。     

A calibration method for the energy-integrating function in photovoltaic system monitoring

Solar radiation has an irregularly varying factor due to a basic day and night cycle and climatic conditions. For such conditions a data sampling interval is important to ensure the accuracy of energy monitoring in a photovoltaic system. While treating a system monitoring equipment as a black box. the author has developed the method of calibrating an energy-integrating function. At first for various input waveforms, the relationship between sampling intervals and quasi-integration outputs have been examined by trapezoidal rule. In the numerical simulation the phases of the sampling clock also are considered Then it is concluded that a sampling interval can be inspected through outside observation only by using a rectangular single pulse. By applying the pulse to the energy-integrating process, two kinds of integrated outputs can be obtained for different sampling phases. The calculated difference between both outputs can uniquely give the sampling interval being inspected. Conditions to ensure measuring accuracy are discussed and the validity of this method has been demonstrated experimentally. Practical calibrating procedures also are proposed for the integrating function of PV system monitoring.     

集成电路测试系统中波形数字化仪的校准研究

文章介绍了波形数字化仪的原理、结构、工作方式及特点,并针对其校准技术进行了深入的研究。通过多功能校准源、示波器及测试系统数字模块实现波形数字化仪模块的精确校准,解决了波形数字化仪模块的校准问题。校准结果表明,该校准装置及校准方法能够满足集成电路测试系统任意波形发生器的校准要求。     

压缩感知理论及其在成像技术中的应用

在传统的Shannon/Nyquist采样定理指导下,信号处理往往面临两大难题:A/D转换器技术的限制和海量采样数据的处理压力.压缩感知(CS)理论表明当信号具有稀疏性或可压缩性时,可以通过全局非自适应线性投影的方式,用远低于Shannon/Nyquist采样定理要求的频率获取信号的全部信息.以CS理论为基础的压缩成像(CI)技术在近年来得到了快速的发展.在概述CS理论的基础上,着重介绍了CI技术的原理及其发展状况,并从稀疏分解、观测矩阵的构造和重建算法3个方面对其关键问题进行了分析.CI系统可以显著节省感光器件的数量,避免了传统成像技术"先采样再压缩"方式带来的资源浪费.     

Waveform design and high-resolution imaging of cognitive radar based on compressive sensing

We introduce the compressive sensing(CS) theory for waveform design of cognitive radar,and then propose an algorithm for the high-resolution radar signal waveform and its corresponding imaging method based on the sparse orthogonal frequency division multiplexing-linear frequency modulation(OFDM-LFM) signal.We first present the principle of spectrum synthesis and high-resolution imaging based on OFDM-LFM signals.Then,we propose the spectrum-sparse waveform design criterion and the reconstruction algorithm for a highresolution range profile(HRRP) based on CS.Based on this,we analyze in detail the relationship between the scattering characteristics of the target and the parameters of the designed signal,and we construct the feedback of the target characteristics on the waveforms.Therefore,the "cognitive" function of radar can be achieved by adaptively adjusting the waveform with the target characteristics.Simulations are given to validate the effectiveness of the proposed algorithm.